Montage- & Anschlussanleitung
Counterweight bar package 2
- Maschinenmarke
- Hitachi
- Artikelnummer
- 110060-23
- Dokument
- PD00094
- Revision
- B
Technische Zeichnungen
Montage, Anschluss & Nutzung
Montage
Use packaging plastic when fitting clamp brackets to avoid damaging or scratching the bar's surface finish.
Verkabelung
- Verkabelung 1
- Connector DT06-08SA 1. Flashlight (+) 2. Flashlight (-) 3. Flashlight night dimming(+) 4. Position light(+) 5. Position light(-) 6. Work light (+) 7. Work light (-) 8. Not connected
Sicherheit & Nutzungseinschränkungen
- The factory products are intended solely as fixtures for lighting and warning systems.
- Under no circumstances may the product be used for towing or as a lifting device.
- The product is also not intended for use as a guard rail, handle or step.
Herstellerangabe
In accordance with VVFS 2003:27 (Swedish regulation), the product's position lighting must not be used while the vehicle is travelling in traffic on public roads. If the product is fitted to a class 1 motorised implement, it must be installed with a switch for the position lights.
Wartung & Reinigung
Maintenance & cleaning: never spray concentrated jets directly at, or use high pressure (pressure washer) on, lamps and other electronic equipment. All our lamps are IP-rated to withstand water and moisture, but for a longer service life, care is recommended when cleaning. On products with a natural anodised surface, do not use alkaline or acidic cleaning agents; these damage the anodised surface. Only use cleaning agents with a pH between 6 and 8. Paint cleaner may be used on heavily soiled surfaces.
Blitzmuster
a. Change the flash pattern by holding the button pressed for about 1 second. b. To reset the flashlights, hold the button pressed for about 5 seconds. The flashlights return to factory mode #0 (Random). NOTE: R65 is the EU-approved pattern and its use is recommended.
9 - Single (all) (R65 - EU Certified)
Alle programmierbaren Blitzmuster anzeigen
- 0 - Random (default)
- 1 - Single (split)
- 2 - Double (split)
- 3 - Quad (split)
- 4 - Quint (split)
- 5 - Mega (split)
- 6 - Ultra (split)
- 7 - Single-Quad (split)
- 8 - Single H/L (split)
- 9 - Single (all) (R65 - EU Certified)
- 10 - Single (all) (SAE)
- 11 - Double (all)
- 12 - Quad (all)
- 13 - Quint (all)
- 14 - Mega (all)
- 15 - Ultra (all)
- 16 - Single-Quad (all)
- 17 - Single H/L (all)
- 18 - Steady 2 (California)
- 19 - Steady 4 (all)
Quelle: Werks-Produktdatenblatt PD00094 (Rev. B), aus dem Schwedischen übersetzt. Das Original ist archiviert. Übersetzt aus der schwedischen Dokumentation des Herstellers.