Questa pagina è stata tradotta automaticamente ed è in attesa di revisione. Le versioni inglese e olandese sono quelle di riferimento.

Machinebars.
Machinebars.

Manuale di montaggio e collegamento

Roof bar package 2

Marca della macchina
Hitachi
Numero di articolo
100760-23
Documento
PD00073
Revisione
B
Torna al prodotto

Disegni tecnici

  • Disegni tecnici 1, Roof bar package 2
  • Disegni tecnici 2, Roof bar package 2
  • Disegni tecnici 3, Roof bar package 2

Montaggio, collegamento e uso

Montaggio

Use packaging plastic when fitting clamp brackets to avoid damaging or scratching the bar's surface finish.

Sicurezza e limitazioni d'uso

  • The factory products are intended solely as fixtures for lighting and warning systems.
  • Under no circumstances may the product be used for towing or as a lifting device.
  • The product is also not intended for use as a guard rail, handle or step.

Manutenzione e pulizia

Maintenance & cleaning: never spray concentrated jets directly at, or use high pressure (pressure washer) on, lamps and other electronic equipment. All our lamps are IP-rated to withstand water and moisture, but for a longer service life, care is recommended when cleaning. On products with a natural anodised surface, do not use alkaline or acidic cleaning agents; these damage the anodised surface. Only use cleaning agents with a pH between 6 and 8. Paint cleaner may be used on heavily soiled surfaces.

Fonte: scheda prodotto della fabbrica PD00073 (rev. B), tradotta dallo svedese. L'originale è archiviato. Tradotto dalla documentazione svedese del fornitore.

Machinebars. MachineBars è un nome commerciale di LMNCOMMERCE, Camera di Commercio (KvK) 93958927

Carrello

Il tuo carrello è vuoto.

Trova la barra per la tua macchina