Ta strona została przetłumaczona automatycznie i oczekuje na weryfikację. Wersje angielska i niderlandzka są wiążące.

Machinebars.
Machinebars.

Instrukcja montażu i podłączenia

Cap bar

Marka maszyny
Kobelco
Numer artykułu
108020-13
Dokument
PD00072
Rewizja
A
Wróć do produktu

Rysunki techniczne

  • Rysunki techniczne 1, Cap bar

Montaż, podłączenie i użytkowanie

Bezpieczeństwo i ograniczenia użytkowania

  • The factory products are intended solely as fixtures for lighting and warning systems.
  • Under no circumstances may the product be used for towing or as a lifting device.
  • The product is also not intended for use as a guard rail, handle or step.

Konserwacja i czyszczenie

Maintenance & cleaning: never spray concentrated jets directly at, or use high pressure (pressure washer) on, lamps and other electronic equipment. All our lamps are IP-rated to withstand water and moisture, but for a longer service life, care is recommended when cleaning. On products with a natural anodised surface, do not use alkaline or acidic cleaning agents; these damage the anodised surface. Only use cleaning agents with a pH between 6 and 8. Paint cleaner may be used on heavily soiled surfaces.

Źródło: fabryczna karta produktu PD00072 (rew. A), przetłumaczona ze szwedzkiego. Oryginał zarchiwizowano. Przetłumaczono z szwedzkiej dokumentacji dostawcy.

Machinebars. MachineBars to nazwa handlowa firmy LMNCOMMERCE, rejestr handlowy (KvK) 93958927

Koszyk

Twój koszyk jest pusty.

Znajdź belkę do swojej maszyny