Tato stránka byla přeložena automaticky a čeká na kontrolu. Rozhodující jsou anglická a nizozemská verze.

Machinebars.
Machinebars.

Návod k montáži a zapojení

Roof bar package 2

Značka stroje
Hitachi
Číslo artiklu
100760-23
Dokument
PD00073
Revize
B
Zpět na produkt

Technické výkresy

  • Technické výkresy 1, Roof bar package 2
  • Technické výkresy 2, Roof bar package 2
  • Technické výkresy 3, Roof bar package 2

Montáž, zapojení a použití

Montáž

Use packaging plastic when fitting clamp brackets to avoid damaging or scratching the bar's surface finish.

Bezpečnost a omezení použití

  • The factory products are intended solely as fixtures for lighting and warning systems.
  • Under no circumstances may the product be used for towing or as a lifting device.
  • The product is also not intended for use as a guard rail, handle or step.

Údržba a čištění

Maintenance & cleaning: never spray concentrated jets directly at, or use high pressure (pressure washer) on, lamps and other electronic equipment. All our lamps are IP-rated to withstand water and moisture, but for a longer service life, care is recommended when cleaning. On products with a natural anodised surface, do not use alkaline or acidic cleaning agents; these damage the anodised surface. Only use cleaning agents with a pH between 6 and 8. Paint cleaner may be used on heavily soiled surfaces.

Zdroj: tovární produktový list PD00073 (rev. B), přeloženo ze švédštiny. Originál je archivován. Přeloženo ze švédské dokumentace dodavatele.

Machinebars. MachineBars je obchodní název společnosti LMNCOMMERCE, obchodní rejstřík (KvK) 93958927

Košík

Váš košík je prázdný.

Najděte rampu pro svůj stroj