Counterweight bar package 2

Konemerkki: Komatsu
Artikkelinumero: 109070-23
Dokumentti: PD00110
Revisio: B

Takaisin tuotteeseen

Asennus, kytkentä ja käyttö

Asennus

Use packaging plastic when fitting clamp brackets to avoid damaging or scratching the bar's surface finish.

Johdotus

Johdotus 1: Connector DT06-08SA 1. Flashlight (+) 2. Flashlight (-) 3. Flashlight night dimming(+) 4. Position light(+) 5. Position light(-) 6. Work light (+) 7. Work light (-) 8. Not connected
Johdotus 2: Connect to switch

Turvallisuus ja käyttörajoitukset

The factory products are intended solely as fixtures for lighting and warning systems.
Under no circumstances may the product be used for towing or as a lifting device.
The product is also not intended for use as a guard rail, handle or step.

Valmistajan ilmoittama tieto

In accordance with VVFS 2003:27 (Swedish regulation), the product's position lighting must not be used while the vehicle is travelling in traffic on public roads. If the product is fitted to a class 1 motorised implement, it must be installed with a switch for the position lights.

Vilkkukuviot

a. Change the flash pattern by holding the button pressed for about 1 second. b. To reset the flashlights, hold the button pressed for about 5 seconds. The flashlights return to factory mode #0 (Random). NOTE: R65 is the EU-approved pattern and its use is recommended.

9 - Single (all) (R65 - EU Certified)

Näytä kaikki ohjelmoitavat vilkkukuviot

0 - Random (default)
1 - Single (split)
2 - Double (split)
3 - Quad (split)
4 - Quint (split)
5 - Mega (split)
6 - Ultra (split)
7 - Single-Quad (split)
8 - Single H/L (split)
9 - Single (all) (R65 - EU Certified)
10 - Single (all) (SAE)
11 - Double (all)
12 - Quad (all)
13 - Quint (all)
14 - Mega (all)
15 - Ultra (all)
16 - Single-Quad (all)
17 - Single H/L (all)
18 - Steady 2 (California)
19 - Steady 4 (all)

Lähde: tehtaan tuoteseloste PD00110 (rev. B), käännetty ruotsista. Alkuperäinen on arkistoitu. Käännetty toimittajan ruotsinkielisestä dokumentaatiosta.