Cette page a été traduite automatiquement et est en attente de révision. Les versions anglaise et néerlandaise font foi.

Machinebars.
Machinebars.

Manuel de montage & raccordement

Counterweight bar package 2

Marque de machine
Komatsu
Numéro d'article
109070-23
Document
PD00110
Révision
B
Retour au produit

Montage, raccordement & utilisation

Montage

Use packaging plastic when fitting clamp brackets to avoid damaging or scratching the bar's surface finish.

Câblage

Câblage 1
Connector DT06-08SA 1. Flashlight (+) 2. Flashlight (-) 3. Flashlight night dimming(+) 4. Position light(+) 5. Position light(-) 6. Work light (+) 7. Work light (-) 8. Not connected
Câblage 2
Connect to switch

Sécurité & restrictions d'utilisation

  • The factory products are intended solely as fixtures for lighting and warning systems.
  • Under no circumstances may the product be used for towing or as a lifting device.
  • The product is also not intended for use as a guard rail, handle or step.

Spécification du fabricant

In accordance with VVFS 2003:27 (Swedish regulation), the product's position lighting must not be used while the vehicle is travelling in traffic on public roads. If the product is fitted to a class 1 motorised implement, it must be installed with a switch for the position lights.

Motifs de clignotement

a. Change the flash pattern by holding the button pressed for about 1 second. b. To reset the flashlights, hold the button pressed for about 5 seconds. The flashlights return to factory mode #0 (Random). NOTE: R65 is the EU-approved pattern and its use is recommended.

9 - Single (all) (R65 - EU Certified)

Afficher tous les motifs de clignotement programmables
  • 0 - Random (default)
  • 1 - Single (split)
  • 2 - Double (split)
  • 3 - Quad (split)
  • 4 - Quint (split)
  • 5 - Mega (split)
  • 6 - Ultra (split)
  • 7 - Single-Quad (split)
  • 8 - Single H/L (split)
  • 9 - Single (all) (R65 - EU Certified)
  • 10 - Single (all) (SAE)
  • 11 - Double (all)
  • 12 - Quad (all)
  • 13 - Quint (all)
  • 14 - Mega (all)
  • 15 - Ultra (all)
  • 16 - Single-Quad (all)
  • 17 - Single H/L (all)
  • 18 - Steady 2 (California)
  • 19 - Steady 4 (all)

Source : fiche produit de l'usine PD00110 (rév. B), traduite du suédois. L'original est archivé. Traduit de la documentation suédoise du fournisseur.

Machinebars. MachineBars est un nom commercial de LMNCOMMERCE, Chambre de commerce (KvK) 93958927

Panier