Airman
Roof bar
Article number: AX38u-7
Specification
- Mounting
- Bar for mounting on the roof
Notes
- Uit de merkenpagina-tabel van de fabriek; component-PDF niet machinaal parseerbaar — specificaties beperkt tot het PD-blad
Price on request
This item is available on request. Ask for price and lead time via the quote form.
Request a quotePrices excl. VAT. B2B: reverse-charge VAT possible with a valid EU VAT number.
Ordering for a fleet, need an invoice first, or want to confirm fitment? Request a quote and we reply within one working day.
Powder coating in your colour
This bar can be powder coated in any RAL colour of your choice, matched to your machine or fleet. Powder coating is always quoted individually: request a quote and mention your preferred colour.
Request a quote with powder coatingMounting, wiring & use
Open printable manualMounting
Use packaging plastic when fitting clamp brackets to avoid damaging or scratching the bar's surface finish.
Wiring
- Wiring 1
- Connector DT06-06SA 1. Flashlight (+) 2. Flashlight (-) 3. Flashlight Nattsxnk(+) 4. Position light(+) 5. Position light(-) 6. Not connected
- Wiring 2
- Connect to switch
Safety & use restrictions
Manufacturer specification
In accordance with VVFS 2003:27 (Swedish regulation), the product's position lighting must not be used while the vehicle is travelling in traffic on public roads. If the product is fitted to a class 1 motorised implement, it must be installed with a switch for the position lights.
Maintenance & cleaning
Maintenance & cleaning — Never spray concentrated jets directly at, or use high pressure (pressure washer) on, lamps and other electronic equipment. All our lamps are IP-rated to withstand water and moisture, but for a longer service life, care is recommended when cleaning. On products with a natural anodised surface, do not use alkaline or acidic cleaning agents; these damage the anodised surface. Only use cleaning agents with a pH between 6 and 8. Paint cleaner may be used on heavily soiled surfaces. Before use, check that the lighting works and that there is no damage to the bar, wiring or mountings. Damaged or broken parts must be repaired or replaced. Damage to the rain guard (Plexiglas) can pose a certain risk of injury — sharp edges may occur, so exercise caution. When disposing of the product, aluminium must be sorted as recyclable and all electrical components as electronic waste. Any rain guard (Plexiglas) must be sorted as hard plastic.
Flash patterns
a. Change the flash pattern by holding the button pressed for about 1 second. b. To reset the flashlights, hold the button pressed for about 5 seconds. The flashlights return to factory mode #0 (Random). NOTE: R65 is the EU-approved pattern and its use is recommended.
9 - Single (all) (R65 - EU Certified)
Show all programmable flash patterns
- 0 - Random (default)
- 1 - Single (split)
- 2 - Double (split)
- 3 - Quad (split)
- 4 - Quint (split)
- 5 - Mega (split)
- 6 - Ultra (split)
- 7 - Single-Quad (split)
- 8 - Single H/L (split)
- 9 - Single (all) (R65 - EU Certified)
- 10 - Single (all) (SAE)
- 11 - Double (all)
- 12 - Quad (all)
- 13 - Quint (all)
- 14 - Mega (all)
- 15 - Ultra (all)
- 16 - Single-Quad (all)
- 17 - Single H/L (all)
- 18 - Steady 2 (California)
- 19 - Steady 4 (all)
Source: factory product sheet PD00242 (rev. A), translated from Swedish. The original is archived. Translated from the supplier's Swedish documentation.
How our bars are built
Video from the factory showing how the aluminium bars are made.