Know-how
Practical, factual articles about machine lighting: mounting, IP ratings, flash patterns and choosing the right package.
The same bar ships in several package levels. How to read the article number suffix, what Package 2 contains, and what the LED light bar in Package 3 adds.
3 min read
Every kit arrives with the loom fitted and every lead labelled: work light in/out, position light, flashlight, night dimming. What those labels mean for the installer.
3 min read
How to read an IP code, the difference between immersion and washdown resistance, and why the manufacturer still warns against pressure washers on lamps.
3 min read
The LED flashlights ship with 20 selectable flash patterns. What ECE R65 approval means, the full pattern list, and how to program the units with one button.
2 min read
The mounting rules that come back across the range: use the machine's original mounting points, protect the finish when fitting clamps, and never use a bar as a step.
3 min read
The manufacturer's regulatory note on VVFS 2003:27, the switch requirement for class 1 motorised implements, and why you should check your own country's rules.
3 min read
The five mounting locations in the range and how they map to machine types: counterweight and roof for excavators, roof and hood for wheel loaders, roof for tractors.
3 min read
The manufacturer's maintenance rules: cleaning agents between pH 6 and 8, no pressure washer on the lamps, a check before use, and how to sort the materials at end of life.
3 min read